Here is some usefull tips that can be practice !!!
Thursday, May 28, 2009
Wednesday, May 27, 2009
GP-2 IN IRC KLANG
I'm in progress of preparation for GP-2 in IRC Klang.
The most important is your skill , focus and stay calm or cool.
From my Experience , there is no need to use exspensive remote controller , even using the standard remote controller with the skill you have is enough to be competitive to others.
Use what you have first, master it , control it. Don't let them control you , you must control them.
Happy Racing !!
The most important is your skill , focus and stay calm or cool.
From my Experience , there is no need to use exspensive remote controller , even using the standard remote controller with the skill you have is enough to be competitive to others.
Use what you have first, master it , control it. Don't let them control you , you must control them.
Happy Racing !!
Thursday, May 21, 2009
SERVICE MY VARIABLE RESISTOR (VR)
Last night I check my MINI-Z car , especially the steering , I just realise that when the Car in max speed the steering will move by it self to the right. This symptom will cause your car not in the straight line in max speed.
Therefore I open the chassis and have a look to the VR , open the plastic cover , spray with air and put a drop of WD40. The put all the part together again then check.
I notice the symptom is gone .!!! :)
Tonight will give some try in the track!!!
Happy Racing !!!
THE BEST AND MINIMUM SETTING FOR MA-010
For the best setting to the MINI-Z car ( AWD MA-010 ) :
1. Must Use BEARING
1. Must Use BEARING
2. Change rear diff to BALL diff.
3. Use GT BodyShell
4. Change Rim follow bodyshell offset. ( Front = +3.5 , Rear=+2.0 )
5. Tyre setting : Front = 30 degree , Rear = 20 degree.
6. Spring setting : Front use HARD , Rear use SOFT.
Use the stock motor first until you can contol the car !!!! After your skill improve the you change the motor to X-Speed for AWD!!!! Then practise again until you can handle the Car !!! This motor is enough to enter the race !!! Happy Racing!!!!
COMPONENT IN MINI-Z CAR ( AWD-MA010 )
1. KNUCKLE
2. SPRING 
3. SWING SHAFT 
4. BEARING
5. CENTER SHAFT
6. WHEEL NUT
7. MOTOR
8. MOTOR HOLDER
9. SPUR
10. PINION
11. DIFFERENTIAL
12. MAIN CONTROLLER BOARD
13. FRONT TOE
14. REAR TOE
15. CHASSIS
16. RIMS
17. TYRE
Tuesday, May 19, 2009
EXCITEMENT OF MINI-Z !!!
What can be done to your Mini-Z !!!!
Well mini-Z is small car ( scale 1:27 ) therefore indoor is the best place to play !!
No worries about rainy day , hot day and so on...
This mini-z car also have the track to play , and the layout is depend on your creativity.
For example : In my case luckly mini-z shop is near by my home, and it easy for me to go and practice !!! It was so much fun!!!! On the track we can learn how to control the car in the corners , tactical corners and also in the straight line !!!. From time to time if you have the regular time to practise at least once a week , more is better , you will find out your skill in handling this mini-z car will improve !!! It proven to me .
INTRODUCTION
In this fews day I will show you the excitement of playing mini-z !!!
In mini-z world we will sharing information on or about all the tuning and setting to the mini-z car .
The most popular mini-z car is MR02 ( Rear wheel drive ) and MA010 ( All Wheel Drive ).
Both of this mini-z's car is competitive to each others.
The only MR02 can't do is DRIFTING.
The MA010 (All Wheel Drive) can do the drifting. It's cool....
Monday, May 18, 2009
GP-1 IN BANGI !!!! ( 16 MAY 2009 )
My car in first !!!!
Subscribe to:
Comments (Atom)
